SN-5040 is a sodium polycarboxylate dispersant, which has low foamability and improves the fluidity of coatings. It has excellent properties of stabilizing slurry viscosity.
Hits：5425 times
General characteristics:
(Appearance: yellowish liquid
solid component (mass%): 43
PH: 7.5 (apparent 50% aqueous solution)
Viscosity (MPA. S): 450 (25 60 rpm) 1700 (5 60 rpm)
Specific gravity: 1.29 (25)
Ionicity: anion
Solubility: Solubility Excellent dispersibility in water
SN-5040 is excellent, small amount of addition can adjust the low viscosity paint, slurry, paint stability is better, paint, slurry viscosity does not change. Because SN-5040 can disperse pigments well, the paint has no float and spots.
SN-5040 can be applied to the wettability of the coating with a small amount of addition, so it does not need to be combined with other wetting agents, and a good water resistance film can be obtained.
SN-5040 can be used to obtain coatings with less foaming and fast foaming, which can be easily coated without long drying time.
Usage: Disperse water-borne coatings with all pigments, such as clay, calcium carbonate, titanium dioxide, etc.
Use method of water-borne adhesives
SN-5040 can be easily dissolved in water at any amount, so there is no special requirement when adding it.The recommended addition of SN-5040 is 0.1-1.0% (solid/solid) of pigment quality. Packaging: 20kg/can, 250kg/barrel
Previous：No data
Next：No data
